Fold width 1800-2250mm DFL
Shuttle number 2448
Weft insertion (max.) 600ppm
1 Main machine
l 72 sets of heddle belt + heddle wire, 34 of heddle wires stations in each group, totaling 2448 pcs.
l Adopt rolling reed structure, each reed eye wear a piece of gauze, a total of 2448 reed eye.
l It adopts two inner and outer tension jump bar, with a maximum of 1872 outer jump bars and a maximum of 576 inner jump bars. Use the outer jump bar as the reference and add the number of inner jump bar as needed.
l Main motor use Italy DERILAP three-phase asynchronous motor (11KW)
l With automatic refueling cup, you can set the refueling time and fueling amount on the control screen.
l The shuttle is equipped with an automatic weft yarn tension control device.
l The shuttle is equipped with front and back Block yarn plate, Max.can loading 120mm diameters weft yarn.
l The shuttle arm has a supporting structure.
l 2 creels total 2592 stations
l Equipped with 2592 hanging hooks
l The creel is designed according to the warp yarn ingot and can be loaded with a spindle with a diameter of 160mm.
Note: Not include Bobbin
1 Fabric winding device
l Center winding, Oil pressure type.
l 3.5NM Motor,torque regulator control.
l We offer a 4.5" roll core (standard size).
Remarks: 4".6" roll core can be selected - need to be customize
1 Bobbin saving
l There is a platform on each side of the circular loom for placing the bobbin.
1 Electrical configuration
► Lighting device
l Equipment is equipped with 4 sets of 18W LED lighting tubes
► Heat sink
l Equipped 2 sets cooling fan in Tension frame.
l But the fan interface and switch are reserved in the control cabinet.
► Let-off system
l A total of 4 feed rollers on both sides of the main machine, ensure that the warp yarns are smoothly fed into the main machine and maintain the real-time tension average.
l Each let-off motor is controlled by load cell + Inverter control let-off motor. Let-off roller control by Let-off motor.
► Take-up system
l Weft density is set by the circular loom main control system.
l Inverter control the take-up motor.
► Weft yarn detection
l It is equipped with a photoelectric sensor and a proximity switch to control the weft yarn together and stop automatically when the weft yarn used up.
l It is recommended to use black bobbin for best effect.
Remarks: Please use light colored tube for black yarn!
► Warp yarn break detection system
l Each warp yarn is length compensated by tension adjuster and automatically stops the machine when yarn breaks.
l The warp yarn breakage has an indicator light, and the six groups of indicator lights are distributed around the equipment.
► Weft yarn break detection system
l 2 sets of magnetic sensors monitor the weft yarn. In case of broken weft yarn, it will stop the machine automatically.
► 6 sets of button boxes
l There are 6 sets of button boxes around the main machine for easy operation. Each control box have inching button, stop buttons and start buttons; all are Schneider brand.
1 Circular loom control system
Circular loom central computer control system can be used
► Adjust the weft density
► Set the length of the Fabric
► Order order
► Manually operate the lifting system without turning it on and provide the following device parameter indications:
l 4 file automatic meter
l Run time calculation
l Change roll / cloth roll indication
► Equipment Evaluation System
The module determines the following additional parameters for each class and evaluates:
l Running time of the device
l The number of warp yarn breaks
l Number of weft yarn breaks
l Frequency of weft yarn use up
l The weft yarn can be precisely adjusted in the open/stop state to optimize the fabric surface effect.
l The above instructions are available in two languages (English/Chinese), with metric or imperial (inch) systems
* according to equipment requirements
We reserve the right to modify the technical parameters due to the continuous improvement of equipment technology.
|No. of warp tapes *||2448pcs|
|Weft insertion (max.) *||600ppm|
|Bobbin inside diameter **||38mm|
|length of bobbin**||220mm|
|Warp bobbin diameter(Max.)||160mm|
|Weft bobbin diameter(max.)||120mm|
|Winding roll diameter(Max.)||1200mm|
** Please specify if there ia any special requirements